CHIEF WM2 Series - Manual (Page 19)

Installation Instructions
19
Security Screw Installation (Optional)
Wall Bracket Covers
1. Remove eight #8-32 x 1/2" Phillips pan machine screws (F)
from wall bracket covers. (See Figure 40)
Figure 40
2. Install eight #8-32 x 1/2" button head security screws (V)
into holes in wall bracket covers. (See Figure 41)
Figure 41
Mount Covers
1. Remove two 8-32 x 3/8" Phillips pan head screws (AB) from
upper cover. (See Figure 42)
2. Raise and remove the upper cover from the mount. (See
Figure 42)
Figure 42
3. Remove two 8-32 x 3/8" Phillips pan head screws (AB) from
lower cover. (See Figure 43)
Figure 43
1 (F) x 8
(Projector arm not shown
for display purposes)
2 (V) x 8
(Projector arm not shown
for display purposes)
1 (AB) x 2
Upper
cover
2
3 (AB) x 2
Lower
cover