CHIEF WM2 Series - Manual (Page 21)

Installation Instructions
21
2. Remove one of four bolts from adapter plate. (See Figure 48)
Figure 48
3. Install one 1/4-20 x 3/4" button head security screw (U) into
hole (vacated by removed bolt in previous step) and into
plastic spacer. (See Figure 49)
4. Repeat Steps 2-3 for remaining three bolts one bolt at a
time.
Figure 49
5. Reinstall projector according to interface instructions.
WM2XXS/WM2XXAUS STANDARD MOUNT
Installing Mount Covers
1. Raise the lower cover (AK) to wall mount and hold in place.
(See Figure 50)
Figure 50
2. Lower the upper cover (AJ) onto the wall mount and fasten
through upper cover (AJ), lower cover (AK) and into wall
mount with two 8-32 x 1/2" Phillips pan head screws (F).
(See Figure 51)
Figure 51
Adapter plate
2 x 4 (one at a time)
Plastic spacer
Adapter plate
(U) x 4 (one at a time) 3
1
(AK)
2
2 (F) x 2
(AJ)