CHIEF WM2 Series - Manual (Page 26)

Installation Instructions
26
Mount Covers
1. Remove two #8-32 x 1/2" Phillips pan machine screws (F)
holding mount covers on projector arm. (See Figure 69)
2. Install two #8-32 x 1/2" button head security screws (V) into
holes on mount cover. (See Figure 69)
Figure 69
Stop Bracket
1. Remove two bolts holding stop bracket in place on
underside of short throw projector mount. (See Figure 70)
Figure 70
2. Install two 1/4-20 x 1/2" button head security screws (T)
through holes in stop bracket and into holes in sliding nuts.
(See Figure 71)
Figure 71
1
2 (V) x 2
(F) x 2
x 2 1
Stop bracket
2 (T) x 2
Stop
bracket
Sliding nuts
locations