AllTrade BAR916HG - Manual (Page 23)

EN
23
2. Press CH to select user 1-4.
3. Press and hold MODE for 2 seconds to enter the Skin
Type Setting Mode of the selected user.
SKIN
TYPE
TAN BURN
HAIR
COLOUR
EYE
COLOUR
Never Always Red Blue
Sometimes Always Blonde
Blue /
Green
Always Rarely Brown
Grey /
Brown
Always Never Black Brown
1
2
3
4
4. Press
or to choose 1 of the 4 skin type settings.
Then press MODE to confirm and enter the SPF Set
Up Mode.
SPF LEVEL OF PROTECTION
Low
Medium
High
1 - 11
12 - 29
30 - 50
5. Press or to increase or decrease the SPF
value. Then press MODE to confirm and enter the UV
Exposure Time Countdown Setting Mode.
6. Press or to enable or disable countdown.
Press MODE to exit the UV Exposure Time
Countdown Mode and start the exposure time
countdown. The remaining user UV exposure time
will display and the will flash.
7. When the countdown has reached “0”, an alarm will
sound for 2 minutes. Press any button to turn the
alarm off. The icon will flash for 2 minutes even if you
have stopped the alarm sound.
MAXIMUM / MINIMUM MEMORY FOR UVI
To view the maximum and minimum memory for UVI:
1. Press SEL to navigate to the Barometer Area.
2. Press MODE to select the UV display.
3. Press MEM to show maximum, minimum and current
UVI readings.
4. Press and hold MEM for 2 seconds to clear the
UVI memory.
NOTE The UV sensor must be activated before you
try and set the additional features. Please refer to the
UVR128 User Manual for more information.
TEMPERATURE AND HUMIDITY
The weather station can display the following information
from any of the 5 remote sensors:
• Current, minimum, and maximum temperatures and
relative humidity percentages.
• Comfort level indicator and trend line (rising, falling,
or steady).
BAR916HG_EN_OP.indd 23 5/8/06 11:24:27 AM