AllTrade BAR916HG - Manual (Page 5)

EN
5
BACK VIEW
1. mb / inHg switch (in battery compartment)
2. RESET button (in battery compartment)
3. °C / °F switch (in battery compartment)
4. Battery compartment (cover open)
5. Wall mount holes
6. Lock button -place the 2 parts of the unit next to
each other, as shown opposite. Twist the lock
button to secure the 2 unit parts together. Twist it
anti-clockwise to release the lock and separate the
two segments.
1
2
3
5
6
4
TABLE STAND AND WALL MOUNT
To stand the unit on a table, twist the lock button (on
the back of the unit) so that the two main unit segments
are unlocked from each other. Then position the unit
as shown below.
To mount the unit on a wall, twist the lock button (on
the back of the unit) so that it locks the two segments
together. Then mount as shown below.
BAR916HG_EN_OP.indd 5 5/8/06 11:21:54 AM