AMX MAX Servers - Manual (Page 37)

MAX Admin Menu
31 MAX Servers: HT Home Theater and MMS Multimedia Servers
Preparing the MAX Server for Receiving Periodic Updates
The IP Settings (Gateway and Primary DNS) in the WinMAX Server Configuration screen must be set
correctly. To prepare your server for automatic updates:
1. Connect your PC to the Internet and open the WinMAX software.
2. Go to an MS-DOS Command Prompt on your PC and type ipconfig /all then press Enter. Note the
Default Gateway and first DNS Server settings.
3. In the System Information tab, click the Server Configuration button to access the Server
Configuration dialog.
4. Copy the Default Gateway and first DNS Server settings (from step 2) into the Gateway and
Primary DNS fields in the IP Settings section of the Server Configuration dialog.
5. Press Save Configuration. The server is now ready for auto-updates.
Output Module Setup
This set of options allows you to add, view and delete external output modules (MAX-AVM audio-video
modules and/or MAX-AOM audio-only modules), as well as MAX-AVP Audio-Video Players.
FIG. 17 MAX Admin Menu - Configure TCP/IP
FIG. 18 MAX Admin Menu - Output Module Setup