AMX MAX Servers - Manual (Page 49)

MAX Admin Menu
43 MAX Servers: HT Home Theater and MMS Multimedia Servers
code setting (keeping in mind that it can only be changed a maximum of five times). Also, insure that the
last region code setting made matches the region in which the MAX will be installed.
Changing The Region Code Setting On Your MAX Server
1. Insert a DVD with your local region coding in the MAX Server’s DVD-ROM drive.
2. In the System Information tab, click the Server Configuration button to access the Admin Menu.
3. Use the arrow button on your keyboard to scroll down and highlight the Change Region option.
4. Press the Return (Enter) to open the Change Region page.
5. Use the up/down arrow buttons on your keyboard to select the appropriate region code setting for
your region, and press the spacebar to make your selection (indicated by an "X" to the left of the
number).
The number of resets still available is indicated at the top of the Change Region page (FIG. 39).
Update Firmware
This set of options allows you to schedule when the server should automatically check for firmware
updates (day of week and time), and to manually update the system immediately (if updated firmware is
detected).
Scheduling Automatic Firmware Updates
Select Schedule from the Update Firmware page to schedule a day of the week and time to check for
firmware updates.
The first page that is invoked is the Day Of Week page (FIG. 41). Use the spacebar to select the day that
you want the check to be performed. Select OK to save your changes and proceed to the Select Time page
where you will specify a time for the check to be performed.
If an update is detected, the firmware will automatically be downloaded and installed on the MAX
server.
FIG. 40 MAX Admin Menu - Update Firmware