Contemporary Research ICC1-IR IR - Manual (Page 12)

Contemporary Research 12 ICC1-IR
Using Display Express or IC Send Software
IC Send
Once you’ve installed the ICC1 controllers, you can test the operation of the system using our IC Send software.
For more detailed information, go to Products/Software Tools/IC Send and download the ZIP file for the app and
manual. This easy-to-use tool can send commands to an IC-HE Head End RS-232 or Ethernet port. As you test
your code, the program will come in handy to prove the system is operating properly, or reset things you’ve
changed.
For example, to change the IR code set for a controller, enter T1 in the first field, the code # listed on page 7,
then the device # of the controller. For example, to set the controller to Sharp, use T1 and 46.
Command Description
Basic
Power Off P0
Power On P1
Tune Analog TC, 2-127
Example: TC,33
Volume VL, Sets TV volume level
0 = Mute
1 – 63 = Minimum level (1) to maximum volume (63)
HD Channel
Tuning Style
ICC1-232
H1= 1 = 5-digit CableCard style tuning (1-9999)
2 = Virtual HD Major-Minor tuning (tunes to virtual channel ID in display)
3 = Physical HD Major-Minor tuning (physical channel, minor digital)
HD Tuning TH, <H1 Style><Major>,<Minor>
Example: TH,2,15,1 tunes channel 15-1
IR
IR Code T1, Sets IR control code.
T1,46 sets controller to Sharp