Contemporary Research ICC1-IR IR - Manual (Page 8)

Contemporary Research 8 ICC1-IR
PC Sensor Setup: LCD marked PC Sensor (Power Current Sensor) do not have discrete IR power commands.
Instead, the ICC1-IR will wait for an “OFF” signal from a power sensor before it sends an ON IR command. Go
to our Support blog page Power Current Sensing for info on sensed absolute power control.
If you want to set the control for unsensed toggling power, turn DIP S1, Switch 7 ON when you set the IR code
with the DIP switches. If you are using IC-Send or Display Express Special Command feature, send the
command T1, with the IR code value + 64. For example, to set Olevia controllers to toggling power, send the
command T1, 102 (38+64).