Setup – options, Head end communication, Tuning system – Contemporary Research SW-DX Manual User Manual
Page 13: Logging, Description, System information
Contemporary Research
13 Display Express System Manual
Setup – Options
The Setup Options pages define how Display Express connects to the system Head End and basic channel tuning
operation.
Head End Communication
Sets the form of communication to an ICC-HE or ICE-HE Head End. The ICC-HE communicates via RS-232, while
the ICE-HE can handle data via Ethernet and RS-232. The RS-232 baud rate is normally set to 19,200. With Version
3.5, the user can specify up to four ICE-HE Ethernet Head Ends. Data will be set to all Head Ends at the same time,
each Head End would be comprised of different Zones of displays.
The user can now specify the time delay between commands, using a 20ms delay for RS-232 and 40ms for
Ethernet; if you experience missed commands, extend the delay time.
Tuning System
Note, this is a legacy tool for older systems with Smart TVs. At most sites, the type of tuning is defined by the
scanning process in the HDTV display.
Logging
Enable logging or debugging features. Only use if asked by Contemporary Research Support.
Description
Change the name of the Display Express app displayed when found by the DX Find app.
System Information
Lists the computer name, IP address and Display Express version.