Presets– edit, Editing modes – Contemporary Research SW-DX Manual User Manual
Page 24
Contemporary Research
24 Display Express System Manual
Presets– Edit
The Display Edit page offers the ability to create, copy, or edit new display control Presets. Display Express assigns
control Presets to three entities:
Editing Modes
Create New Preset – Clears values in the Preset fields.
Edit Existing Preset – Fills in the values from the selected Preset. Change and Save.
Copy Existing Preset – Copies the values from the selected Preset. Change and Save.
Displays
Group – Send preset to a named group
Zones – All displays for all or one of 15 Zones respond to a single Preset
Display – Selects display by name (see Displays-Names)
Display# – Selects a display by entering an address
Operations
Save – Saves Preset
Delete – Delete Preset
Send – Sends Preset for testing operation
Manual Control
In addition, you can select any Group, Zone, and Display, then enter a command on the right, then click SEND to
send a command without saving as a Preset, or testing a Preset before saving.