Contemporary Research SW-DX Manual - Manual (Page 28)

Contemporary Research 28 Display Express System Manual
If you want to create the array with Commands alone, click Use Commands and Show Commands in the Macro
section and enter the commands as needed.
Editing is seamless between Macros and Commands. When you use a Macro, all the values are shown in the row.
You can switch to Commands and change one value, such as Volume, without needing to change the macro. In
that case, the Macro name will go away, but all the values from the macro will be kept.
The Show Commands option is also useful if you want to see what commands are stored inside a Macro.
Controlling Power and Startup Delays.
Once a display is powered on, there is often some delay before the display is ready to listen to another command.
Our controllers know this, and have a built-in time delay before they send commands included with power on. It’s a
great feature, but don’t include Power On commands in a multi-step Preset. Since some sets LGs need to wait 8
seconds after power, it slows the process down.
The better plan is to power up the displays at the beginning of the event or day. Then use Presets with the other
commands after that.