Contemporary Research SW-DX Manual - Manual (Page 34)

Contemporary Research 34 Display Express System Manual
Alerts - Edit
The Alerts Edit page functions the same way as scheduling Events. However, Alerts behave differently than
Events or Presets. When an Alert is sent, the iC-Net controllers will save their current power and channel settings.
When an Alert ends, the controllers will return displays to their saved setting.
Editing Modes
 Create New Alert – Clears values in Alert fields.
 Edit Existing Alert – Fills in the values of the Alert command. Change and Save.
 Copy Existing Alert – Copies the values of the Alert Command. Change and Save.
Alert
 Name – Enter a name for a new or copied Alert.
 Preset – uses the values of a selected Preset, adds Save and Restore automation
 Volume after Alert – sets volume to set level after the Alert
 Suspend Schedule – deactivates scheduled presets when the Alert is active
Save the Alert. Up to 45 Alerts will appear on the Alerts Control page, and any Alert can be added to custom Web
Panels.
Other systems can also trigger Alerts, sending a Telnet command to the DX computer. See Telnet Commands at
the end of this manual.