ALLIED Vision Technologies Bigeye G-1100 Cool User Manual
Page 13
AVT GigE Cameras Installation Manual V1.0.0
13
Safety instructions
Caution
Board level cameras: General warnings
•
Be sure that all power to your board level camera is
switched off before mounting the sensor board or making
connections to the camera.
•
Do not connect or disconnect any cables during an
electrical storm.
•
Do not use your board level cameras during an electrical
storm.
•
To help avoid possible damage to the sensor board or
main board, wait 5 seconds after power is switched off,
before connecting or disconnecting any cable to the
board level cameras.
•
Keep your board level cameras away from radiators and
heat sources.
•
Avoid contact of board level cameras with liquids.
Caution
Board level cameras: Loading
•
Avoid any mechanical forces to the board level cameras,
the boards and its components, especially torsional, ten-
sile and compressive forces.
•
To avoid damages of the boards, provide cables with an
external pull relief so that no force is applied to the con-
nectors itself.
Caution
Board level cameras: Dirty environments
•
Always use clean boards.
•
To protect the board level cameras from debris always use
in a clean environment or a protective housing.