ALLIED Vision Technologies Bigeye G-1100 Cool - Manual (Page 51)

AVT GigE Cameras Installation Manual V1.0.0
51
Appendix
Appendix
AVT camera cleaning instructions
This chapter describes safety instructions/cautions valid for all AVT GigE camera
families in case of cleaning lenses, optical filters/protection glass or sensors.
Warranty
Caution

Bigeye G cameras have the sensor in a vacuum housing. This
vacuum housing is dust-free.
Therefore there is no need to clean the sensor.
• Do not open the vacuum housing.
Note

• Please read these instructions before you contact your
AVT camera dealer for assistance.
• Ask your AVT camera dealer if you are not familiar with
the procedures described below.
Caution

Warranty precautions
• To ensure your warranty remains in effect:
– Do not open the camera housing.
– Follow instructions described below.
– Use only optical quality tissue/cloth if you must clean
a lens or filter.
– Use only optics cleaner (60% ethyl alcohol, 40%
ether). Never use aggressive cleaners like benzine or
spirit. Such cleaners may destroy the surface.
– Do not use compressed air which can push dust
into camera and lens.
• AVT does not warranty against any physical damage to
the sensor/filter/protection glass or lenses caused by
the user during the cleaning process.