Datamax-O'Neil LP3 LABEL PRINTER User Guide - Manual (Page 19)

U
SING THE
C
ONTROL
P
ANEL
16
Battery Status LED
Battery
Status LED Description Action
Red (solid):
The batteries
have less than
5% power. • If A/C power is not plugged
in, the printer will soon turn
off.
• If A/C power is plugged in,
the LED flashes and
charging is in progress.
• Charge batteries.
• None. Wait for the
charge LED to turn
green.
Orange (solid):
The batteries
have less than
25% power. • If A/C power is not plugged
in, indicates the batteries
are low.
• If A/C power is plugged in,
the LED flashes and
charging is in progress.
• Charge batteries.
• None. Wait for the
charge LED to turn
green.
Green (solid):
The batteries
are near, or at,
full capacity. • If A/C power is not plugged
in, batteries are well
charged.
• If A/C power is plugged in,
the LED is solid and
charging is complete.
None.
None.
Red to orange
flash - fast Battery voltage is too high. Replace battery.
Orange flash -
slow Charge has timed out. Restart battery charge
(battery may be bad).
Orange flash -
fast Internal code error. Remove batteries, then
re-connect A/C power.