Datamax-O'Neil LP3 LABEL PRINTER User Guide - Manual (Page 22)

LP 3 LABEL PRINTER USER'S GUIDE
19
Maintenance and Troubleshooting
Maintenance Guidelines
• Keep the printer in a cool, dry place, away from direct
sunlight, high temperature, and moisture.
• Do not insert foreign objects into the printer.
• Do not operate the printer if it appears damaged.
• Do not operate the printer when your hands or body are
wet.
• Do not operate the printer near water.
• To reduce risk of electric shock, unplug the printer and
remove the batteries before cleaning.
Preventative Maintenance
Area Method Interval
Printhead/
roller Use an approved cleaning card. After every ten (10)
rolls of media.
Tear bar Clean thoroughly with 70%
isopropyl alcohol on a cotton
swab. After every five (5)
rolls of media.
Exterior Use a soft cloth and mild cleanser
if necessary. Do not use abrasive
cleanser, chemicals or scrubbing
pads, which can mark your
printer's finish. As needed.