Asus Motherboard AP130-E1 - Manual (Page 37)

ASUS PSCH-L motherboard 2-17
2.6 Jumpers
1. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the
computer when you press a key on the keyboard (the default is the
Space Bar). This feature requires an ATX power supply that can supply
at least 1A on the +5VSB lead, and a corresponding setting in the
BIOS (see section 4.5.1 Power Up Control).
PSCH-L
®
PSCH-L Keyboard Power Setting
KBPWR1
(Default)
+5V +5VSB
1 2 2 3
2. RAID enable (3-pin RAID_EN)
This jumper allows you enable or disable the onboard RAID feature.
PSCH-L
®
PSCH-L RAID Setting
RAID_EN
Enable
(Default) Disable
2 3 1 2