Asus Motherboard AP130-E1 - Manual (Page 87)

ASUS PSCH-L motherboard 4-33
4.6Power menu
The Power menu items allow you to change the settings for the Advanced
Power Management (APM). Select an item then press Enter to display the
configuration options.
APM Configuration
Power Failure Recovery [Last State]
Resume On Ring [Disabled]
Resume On LAN [Disabled]
Resume On RTC Alarm [Disabled]
Configures the system
state after recovering
from power failure.
4.6.1 Power Failure Recovery [Last State]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state
whatever was the system state before the AC power loss. Configuration
options: [Power Off] [Power On] [Last State]
4.6.2 Resume On Ring [Disabled]
Allows you to enable or disable RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
4.6.2 Resume On LAN [Disabled]
Allows you to enable or disable LAN GPI to generate a wake event.
Configuration options: [Disabled] [Enabled]
4.6.3 Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values.
Configuration options: [Disabled] [Enabled]