Asus Motherboard AP130-E1 - Manual (Page 75)

ASUS PSCH-L motherboard 4-21
4.4.3 Super IO Configuration
The items in this menu allow you to configure the Super I/O chipset. Select
an item then press Enter to display the configuration options.
Configure Win627 Super IO Chipset
OnBoard Floppy Controller [Enabled]
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
PS/2 Mouse Support [Auto]
Allows BIOS to enable or
disable the floppy drive
controller.
OnBoard Floppy Controller [Enabled]
Allows you to enable or disable the onboard floppy disk controller.
Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address.
Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode. Configuration options:
[Normal] [Bi-directional] [EPP] [ECP]
ECP Mode DMA Channel [DMA3]
Configuration options: [DMA0] [DMA1] [DMA3]