Asus Motherboard AP130-E1 - Manual (Page 77)

ASUS PSCH-L motherboard 4-23
IDE Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices. Configuration
options: [0] [5] [10] [15] [20] [25] [30] [35]
ATA(PI) 80Pin Cable Detection [Host & Device]
Selects the mechanism for detecting 80-pin ATA/ATAPI cable.
Configuration options: [Host & Device] [Host] [Device]
4.4.5 USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press Enter to display the configuration options.
USB Configuration
Module Version - 2.23.2-7.4
USB Devices Enabled:
None
USB Function [All USB Ports]
Legacy USB Port [Enabled]
USB 2.0 Controller [Enabled]
USB 2.0 Controller Mode [HiSpeed]
Enables USB host
controllers.
USB Function [All USB Ports]
Allows you to set the number of USB ports to activate. Configuration
options: [Disabled] [2 USB Ports] [All USB Ports]
Legacy USB Support [Enabled]
Allows you to enable or disable support for legacy USB devices. Setting to
Auto disables the legacy support if no USB devices are connected.
Configuration options: [Disabled] [Enabled] [Auto]
The Module Version and USB Devices Enabled items show the auto-
detected values. If no USB device is detected, the item shows None.