Avaya NN43113-101 - Manual (Page 327)

Advanced features
327
The options, which are available for the Enable (with password) mode are
as follows:
• Ok —Screensaver enabled message appears if the password is valid.
Invalid password message appears if the password is invalid.
• 123/abc —to toggle input mode between numeric or alphabet.
• Set —context-sensitive soft key appears only if the feature allows the
configuring of user-defined passwords. This key invokes a password
definition screen that allows you to configure a password.
• Back —to dismiss the Enable (with password) mode menu.
If the option to use a user-defined password is allowed, the interface
(screen) to configure the password, is accessed through the
Set context-
sensitive soft key on that screen. If a user-defined password is not
allowed, then the
Set context-sensitive soft key is not visible, and you can
use only the primary user login password to enable the password–
protected screensaver.
After the screensaver is activated, if the IP Deskphone is idle for the
defined delay/time interval, the screensaver takes control of the
IP Deskphone.
Figure 62 on page 327 displays the screen with locked
screen.
Figure 62: Screensaver locked screen
The following option is available for the Enable (with password) mode:
• Unlock —if the screensaver is not password protected, this key press
(or any other) cancels the screensaver. If the screensaver is in a
password–protected mode, pressing the
Unlock context-sensitive