Draw-Tite 90195 P3 - Manual

P/N 5881 REV C 02/12
Electronic Brake Control
For 2, 4, 6 and 8
brake applications
READ THIS FIRST:
Read and follow all instructions carefully before
installing or operating the P3. Keep these instructions
with the Brake Control for future reference.
Table of Contents
Installation Guide ............................................. 2 - 3
Mounting P3, Automatic Leveling of Sensor .. 3 - 4
Set Brake Type ................................................ 4
Adjusting the Power to the Brakes .................. 5
Setting Boost .................................................... 5 - 6
Reverse ............................................................. 7
Set Language .................................................... 7
Set Screen Brightness / Color / Contrast ......... 8
Troubleshooting ............................................... 9
Warnings & Cautions ...................................... 10
Appendix A: Trailer Brake Adjustment .......... 11
Components of the Brake Control
A. Power Buttons
B. Boost Button
C. Menu/Options Button
D. LCD Display Screen
E. Connector (For Wiring Harness)
F. Mounting Hole (1 per side)
G. Manual Knob
Important Facts to Remember
1. Do not mount or activate RF generating items
(cell phones, two way radios) near (less than 12")
the brake control.
2. The P3 employs an inertial sensor. It senses
deceleration and generates an output that is based
on deceleration, thus the term “Proportional
Braking”.
3. The P3 will “HOLD” your trailer with 25% of
power setting while you are at a standstill with
brake pedal applied for longer than 5 seconds.
4. The P3 will brake proportionally in reverse.
It will apply the appropriate brake voltage based
on deceleration.
5. WARNING The Gross Combined Weight Rating
(GCWR) must never exceed the vehicle manufac-
turers recommendation.
6. CAUTION Boost not intended to be used during
icy road conditions.
7. For Technical Assistance and Warranty
Information call: 1-888-785-5832 or
www.tekonsha.com.
G
A
B
F
E
C
D
© 2012 Cequent Performance Products, Inc.