Draw-Tite 63181 TOW BAR - Manual

63181 Adjustable Tow Bar Instructions
READ, UNDERSTAND, FOLLOW AND SAVE
THESE INSTRUCTIONS
• Read, understand and follow all instructions before installing and using this product.
• Never allow anyone unfamiliar with these instructions to use this product. Read, understand and
follow all instructions provided by the manufacturer of the product(s) on which this product will be
installed.
• Installation of this product must conform to the following mounting instructions.
• Save these instructions for use as a reference in the future.
WARNING
Failure to follow these warnings and instructions may result
in property damage, serious bodily injury, and/or death.
Installation Notes
• This tow bar is to be installed by a professional installer/fabricator experienced in
selecting vehicle attachment areas with adequate strength.
• Park vehicles on level ground for installation.
• The coupler must be level within 5º when attachment is complete.
• Bumper attachments should be reinforced as shown below.
• Attachments to the towed vehicle should be bolted not welded.
• Keep mounting surface of brackets as close to being flush with the front of the
bumper as possible to allow free vertical travel.
• Attach tow bar to properly mounted brackets with pins and secure with attached
wire.
• Adjust coupler for proper fit to the ball; see coupler adjustment on page 7.
• Avoid suspension and brake components with attachments.