eLine Technology EYS-VMS eyStream User Manual Part3 - Manual (Page 20)

220
Video surveillance in Alarm Management mode
Video surveillance functions available in Alarm Management mode
The following video surveillance functions are available in Alarm Management mode:
1. Scaling the viewing tile.
2. Digitally zooming video images.
3. Processing video images.
4. Taking snapshots.
5. Forwarding and reversing playback of an alarm at various speeds.
6. Evaluating alarms (assigning a status).
Note
The following functions are accessible in all video surveillance modes: scaling the
viewing tile, digital zoom, video image processing, select video camera functions,
snapshots, and object tracking. A description of these functions is provided in the
section titled Functions Available in All Video Surveillance Modes
Initiating an Alarm
A system alarm can be initiated in one of two ways:
1. Manually (by an operator)
2. Automatically (when a detection tool is triggered is triggered)
Note
You can initiate an alarm only if the specific video camera is linked to the archive.
Manual Initiation
To initiate an alarm manually, you must perform the following steps:
1. Switch to real-time video surveillance mode (see the section Switching to Live Video Mode ).
eLineTechnology.com 303.938.1133