eLine Technology EYS-VMS eyStream User Manual Part3 - Manual (Page 60)

260
In this case, the map is scaled and refocused to center the icon for the alarm camera on the map.
If alarms occur for several video cameras simultaneously, the map scale and position are adjusted
to show all icons for the relevant video cameras.
After a video camera alarm ends and there are no alarms for other video cameras, the map scale
and position return to their initial status.
Automatic scaling and focusing of the map stops during the following actions:
When the user clicks to select the icon of a video camera on the map or viewing tile
To manually adjust the map scale, use the mouse scroll wheel (the cursor must be above the
map) or use the map scale slider.
After increasing the scale, you can refocus the map with the mouse (by clicking and holding the
left mouse button) in the direction of your choice.
Immersive mode
In immersive mode, video from a selected camera is shown above the map display. The location
of the video on the map matches the field of view of the relevant camera; the map is adjusted
accordingly.
To switch to immersive mode, display the map in 2D (see Changing the map tilt ) and left-click the
video camera icon or its field of view.
eLineTechnology.com 303.938.1133