eLine Technology EYS-VMS eyStream User Manual Part3 - Manual (Page 22)

222
If an alarm is initiated automatically, a color-coded indicator will appear on the Alarms tab and
the alarm preview tile will be displayed in the bottom left corner of the viewing tile (the video
recording of the beginning of the alarm event plays repeatedly) while the rest of the viewing tile
will be dimmed.
To evaluate the situation, go to the Alarms tab or left-click the alarm preview tile and then accept
the event for processing (see the section titled
Accepting an alarm for processing ).
Accepting an alarm for processing
To accept an alarm for processing, go to the Alarms tab. All currently active alarm events are
displayed on this tab. Under each alarm event you can see the name of the video camera that
registered the alarm. If the alarm was initiated by a detection unit, the alarm event will be
marked by the icon of the specific detection unit. To accept an alarm for processing, left-click the
alarm event or the alarm preview tile.
eLineTechnology.com 303.938.1133