eLine Technology EYS-VMS eyStream User Manual Part3 - Manual (Page 42)

242
Motion in an area
When configuring the Motion in an area criterion, you can set one or more of the following
parameters:
1. Minimum size of a moving object
2. Maximum size of a moving object
3. Color of a moving object
4. Direction of an object’s motion
5. Minimum speed of an object
6. Maximum object speed
7. How an object appears in the area
8. How an object leaves the area
The procedures for setting the minimum and maximum size of a moving object are identical
except for the need to use the
button to take into account the minimum size and the
but ton to take into account the maximum size.
The full procedure for setting the minimum (or maximum) size of an object is provided below:
1. Click the appropriate button ( or ).
2. When you do this, a visual element will appear in the viewing tile. This visual element serves
two purposes; it graphically represents an object of the minimum (or maximum) size and
sets this size.
3. The minimum (or maximum) size of a moving object can be set using any of the following
methods:
eLineTechnology.com 303.938.1133