eLine Technology iVMS-4000 V2.03 - Manual (Page 100)

User Manual of iVMS-4000(V2.03)
Note: Supported file formats are BMP & JPEG.
4 th step: Add sub map, right click the image name in the
map info area or the image itself, and the sub menu will pop
up.
Select “Add Sub E-map” to add sub map.
Select “Properties” to change the map name and image
file.
Click “Browse” to search the image file on the local
PC. Click “OK” after renaming the file to finish.
3 rd step: Add the map.
11.2 Map Configuration
Map configurations need to be done under the map edit mode.
11.2.1 Hot Spot
Through hot spot configuration, user can mark out the location and live view of the monitoring points on
the e-map.
Add Hot Spot
1 st step: Right click the image name in the map info
area or the image itself, and select “Add Hot Spot”.
99