eLine Technology iVMS-4000 V2.03 - Manual (Page 80)

User Manual of iVMS-4000(V2.03)
9.1.3 Network Configuration
79
9.1.3.1 Basic Configuration
 Select
Configure the network according to the actual
situation. If there is DHCP server in the network, enable
“Obtain Auto” and reboot the device to get the IP
address under this network segment automatically.
Select “Advance” to enter advanced configuration.
You can configure preferred DNS server1 and spare DNS
server2, IP address of alarm host and IP server.
Parameters Description
DNS1 DNS2
Preferred and spare DNS server
Alarm host Alarm signal can be uploaded to the IP address automatically
IP sever IP address of IP server
9.1.3.2 PPPoE
Select 
Enable PPPoE by ticking , input the user name and
password, then save the changes and reboot the device
to make the parameters become effective.
If succeed to dial, the current IP address will be
display k “DDNS IP”. ed in the blan