eLine Technology iVMS-4000 V2.03 - Manual (Page 86)

User Manual of iVMS-4000(V2.03)
85
9.1.6 Others
9.1.6.1 Remote update
Click
Click “Browse” to search the local upgrade file, click
“Upgrade” to start upgrade remotely.
9.1.6.2 HDD Format
Click
Note: Please backup the data before formatting
hard disk.
9.1.6.3 Zero-channel Settings
Z special y used for encoding the spot output port. User could set the spot output
(zero-channel) encoding pa meters, window divisions and the cycle mode. By this function, user could preview
the video
r user.
ero-channel is l
ra
of the spot output, it could save the bandwidth fo
Note, this function is supported by the 9000 / 9100 series DVR with the version 1.2 or higher and 9600
series NVR.
If the device supports zero-channel, and the channel number is set to be more than the analog channel
number, the last channel of the device will be zero-channel. The priority of the zero-channel is higher than IP
camera channel, if you want to use the IP channel of the DVR, you need to set the channel number to be one
more than the summation of the analog and IP channel number, zero hannel need this one channel to display.
-c