eLine Technology iVMS-4000 V2.03 - Manual (Page 42)

User Manual of iVMS-4000(V2.03)
Chapter 6 PTZ Control
6.1 RS-485 Parameters Configuration
Before PTZ operations, please make sure that RS-485 parameters has been correctly configured by iVMS
software.
Set right parameters of the each
channel.
Note: RS-485 configuration must
be the same with PTZ configuration.
Click
to unfold the options, shown as figure on
the right.
Click “Setup” and enter the
corresponding interface.
Right click the device name and select
“Remote Configuration” from the sub
menu.
6.2 PTZ Control
Return to preview interface and user can control PTZ.
There are 8 keys to control PTZ directions, and the
slide bar is used to change PTZ speed, which is
adjustable from level 1 to 7, with the default speed of 4.
Click key to start auto scan.
Click the function keys on the right to adjust focus,
iris and zoom.
Other PTZ Control Mode – Screen PTZ Control: user can control PTZ by dragging and click in the play
41