eLine Technology ETV_v7 - Manual (Page 12)

ETV System Server Software - User’s Guide Page 12
3.2 Camera Layout and Quick Access
Use the buttons in the top section of the Live Viewer side toolbar to select the viewing style. If you have more
cameras enabled than can be displayed by the current view settings, you can right-click on the layout icon and
select a page of cameras to display.
Software Rendered mode for 32 channel systems has these available viewing options:
Single view mode (1 camera), 2 x 2 mode (4 cameras), 3 x 3 (9 cameras), 4 x 4 (16 cameras), 5 x
5 (25 cameras), 6 x 6 (36 cameras). 2 large w/8 small cameras, 1 large w/12 small cameras.
Hardware Rendered mode viewing options vary based on the system model.
To quickly select a camera for Single Live View display mode, click its corresponding number in the
Camera Quick Access pad. Camera Quick Access also provides a simple way to check the recording
status of each camera, which is communicated through color:
Green : Constant recording mode and is recording.
Blue : Motion recording mode and is recording (motion detected).
Red : Alarm recording mode and is recording (alarm triggered).
Yellow : Set to a motion recording mode and is recording (motion currently not detected and will
stop after the Post Motion Record time has elapsed).
Uncolored : Camera is currently not recording, but is enabled.
Disabled : Camera is not recording and is disabled.
To arrange the cameras within the current view style, right-click on a camera position in the Live Viewer
window and select a camera to be displayed from the context menu. Since you cannot display a camera in
more than one location, if you selected a camera that is already displayed, it will move the camera feed to the
new location.
To remove a camera from the Live Viewer window, right-click that particular camera feed and select Stop.
Note: Stopping or changing camera feeds in the Live Viewer window does not affect the recording
settings.
When in Software Rendered mode, right-click a camera feed to view the following options:
Copy Copies the current video image to the Windows clipboard.
Full Screen
Enlarges the live video feeds to fill the entire PC window.
Note: To zoom in on an image in Full Screen mode, hold down the keyboard Control key and left-
click. To zoom out on an image, hold down the Control key and right-click.
Quick Search
Plays recent footage for the selected camera in the Playback window; select from One, Five, or Ten
Minutes before the current time.
Zoom Opens the zoom control. Left-click on an image to zoom in and right-click to zoom out.
OSD
Enable On-Screen
Display
Enable On Screen Display of POS Data. This option will be available if the
camera is configured as a POS Priority Camera.
Configure OSD Opens the OSD Configuration Window. See section 4.9 for details.