eLine Technology ETV_v7 - Manual (Page 17)

ETV System Server Software - User’s Guide Page 17
Joystick
If a USB PTZ Joystick is attached, this button will be available. Once clicked,
it opens the Joystick Customization window.
This window allows for customization of each of the joystick
buttons. Use the drop-down menus to assign actions to each
button.
To determine which button is which, go into the Windows Control
Panel and select Game Controllers, where the device will be listed.
Select it and click Properties. Click any button on the joystick and
the button number will be highlighted in the resulting window.
Presets
Presets are fixed locations that the camera can save and go to. The presets are stored
within the camera for hard-wired PTZ cameras, and in VIGIL Server for digital PTZ
cameras.
To save a preset, move the camera to the desired preset location, select the preset number from
the drop-down menu and click Save. This will overwrite any presets previously saved to that
number.
To move the camera to an existing preset, select a preset from the drop-down menu and click
Goto, or click the button with the preset number on it.
Patterns
Control the saved pattern of movement for the selected camera. Patterns are stored
within the camera.
Select a pattern from the drop-down menu and click Record. Use the other control buttons to
move the camera in the desired pattern. Once finished, click Stop. This will overwrite the existing
saved pattern. Select a pattern from the drop-down menu and click Run to begin the saved
pattern.