eLine Technology ETV_v7 User Manual
Page 52
ETV System Server Software - User’s Guide Page
52
Note: The number of banks and the cameras in each bank is determined by the capture card
installed, which cannot be configured. There are many possible layouts of banks and channels per
bank.
Camera Select a camera number within the current bank tab to change its settings.
Capture
Resolution
Select the desired recording resolution from the drop-down menu.
Recording Speed
Select the desired number of frames per second. Each bank has a set amount of FPS that can be set
to its cameras. Values will change depending on the recording speeds for other cameras within the
same bank.
Network Camera
Network cameras are automatically detected and the analog feed is disabled for that camera
number. Network camera speeds are independent of other cameras and do not change the
maximum allowable FPS for cameras belonging to the same camera bank.
Push Still Shot to Server
The Push Still Shot to Server Settings window allows a still shot from the camera to be copied periodically to
another location. To enable this feature for the selected camera, check the Enabled box. Click the Settings…
button to configure the destination for the still shots. This applies to all cameras.
Type The
type of storage location. Options are FTP Location, Windows Network Share and Local Drive.
The path where the image files will be uploaded (only pre-existing directories can be used).
Path
Local Directory: C:\images.
Network Directory:
\\ComputerName\SharedFolder
.
FTP site: ftp://ftpserver/folder.
FTP User Name
and Password
If required, enter the user name and password for the FTP Site.
FTP Timeout The
time to wait in seconds before a timeout occurs.
Overlay Text Check
this to have an overlay of the camera name, date, and time on the still shot.
Update Frequency The
frequency, in seconds, at which the image file is uploaded to the specified path.
Test Connection
Tests the connection using the specified parameters. A window will display a message stating
whether the connection is successful or not.