eLine Technology ETV_v7 - Manual (Page 89)

ETV System Server Software - User’s Guide Page 89
Alert Settings Tab
Opens the Video Analytics Alert Settings window that allows you
to schedule the alarm recording period and configure alerts. The
Video Analytics Alert Settings window is the same as the Video
Motion Alarm Advanced Settings Window. See the section on
Video Motion Alarm Advanced Settings
for configuration information.
Rule Settings Tab
For this rule it is recommended to set the Tripwire Direction to Exit so that the results of the rule in the database make
sense as, Exiting the Queue Region.
Tripwire
Direction
Choose to monitor objects entering only, exiting only, or entering and exiting.
Enter Alarm
The Enter Alarm is triggered based on the number of people entering during a period of time. Check
the Enter Alarm checkbox to enable the alarm and then select number of people and period of time in
seconds using the arrow select tools.
Exit Alarm
The Exit Alarm is triggered based on the number of people exiting during a period of time. Check the
Exit Alarm checkbox to enable the alarm and then select number of people and period of time in
seconds using the arrow select tools.
Alarm Dwell The number of seconds of video recorded in alarm mode once the alarm is triggered.
Reset Statistics
when Alarmed
Enable this option to reset the statistics to zero once the alarm is triggered.
Due to the nature of the data gathered, disabling the Reset Statistics When Alarmed feature can cause
a flood of notifications when the threshold is reached.