eLine Technology ETV_v7 - Manual (Page 33)

ETV System Server Software - User’s Guide Page 33
Markers
During playback, if only a sub-range of the loaded footage is of interest it can quickly be selected by using
Markers. To use Markers, select the Markers tab from the Advanced Features section.
Start / End Range
Position the footage navigation slider at the beginning of the sub-range and click the Start Range
button. You will notice a small marker appear below the starting point. Next, navigate to the end of
the sub-range and click the End Range button.
Clear
Removes the sub-range markers. If the sub-range is cleared when the View button is latched on,
the playback will return from the sub-range to the fully loaded footage.
View
Loads the sub-range for playback. The playback information will indicate that a sub-range is
currently displayed. All of the playback controls will operate on only the sub-range of footage.
Note: If multiple cameras are loaded for playback in Multi-Screen mode, each camera can have its
own unique sub-range of footage.
Note: If a sub-range has been defined, only the sub-range will be saved when video is exported.
Audio Playback
If audio recording is enabled and configured in the DVR settings, the Audio tab will become available in the
Advanced Features section of the Search window. Selecting an audio channel from this tab allows you to
playback recorded audio along with video footage.
To choose which audio channel to playback, select the channel from the drop-down menu in the
Audio tab.
All Audio
When selected, all audio from the specified channel is played back even when there is no
corresponding video footage for the playback time.
Video Only Audio
When selected, audio from the specified channel is played back only when there is corresponding
video footage for the playback time.
This Audio Level Meter indicates the signal strength of the currently playing audio.