American Audio Versadeck - Manual (Page 19)

© American Audio ® - www.AmericanAudio.us - VERSADECK Instruction Manual Page 19
INTERNAL MENU
Press the FOLDER KNOB (1) for at least 3 secs. to enter the Internal Menu. Turn the FOLDER KNOB (1) to
scroll through the different submenus. Turn either the TRACK KNOB (21) or JOG WHEEL (16) to change the
submenu settings.
To save and exit the internal menu, turn the FOLDER KNOB (1) until G. Exit & Save is displayed, press the
TRACK KNOB (21) to save your settings. If your settings were saved correctly, "Saving" will appear briefly in
the VFD (23).
NOTE: You can exit the Internal Menu anytime you want by pressing the FOLDER KNOB (1), however your
modified settings will not be save.
1. PLAYLIST - Normal / Title/ Artist / Album / Genre
The DATABASE BUILDER can generate "Playlist" for USB device. You can adjust various criteria in order
to filter tracks in this setting. You can turn the TRACK KNOB (21) or JOG WHEEL (16) to scroll through
the different settings; " Normal / Title/ Artist / Album / Genre". See page 33 Playlist Operation.
2. REPEAT MODE - 3 different modes: Play All Repeat / Folder Repeat / Track Repeat
3. MIDI CH - Setup MIDI Channel from 1 to 16 (Deck A - Mixer - Deck B).
4. MIDI SETUP -
• TAP = HOLD/TOGGLE
• I/O = Hide/DIS. (Hide/Display MIDI I/O value)
5. CROSSFADER -
• LOCK = To lock the crossfader in the middle of the two channels
• UNLOCK = The crossfader is back to normal status
6. CROSSFADER REVERSE -
• ON = Reverse the crossfader
• OFF = Normal Mode
7. DISPLAY TIME - 0.5 ~ 12.0 secs. (Line name start/stop time adjustment)
8. SCROLL SPEED - 50 ~ 2000 msecs. (Adjust the scroll speed of the character display)
9. SENSITIVITY - Touch Wheel Sensitivity adjustment (Adjustment range is -20 ~ +20)
A. INTENSITY - VFD Brightness (Brightness Range is 1 ~ 4)
B. A.CUE LEVEL - Change the AUTO CUE level (Level range is -36 ~ -78dB)
C. LINE SETUP - Select VFD line name and display
D. BIT RATE - Display ON/OFF
E. VERSION - CXX (Control Version) DSPXX (DSP Version)
F. LOAD DEFAULTS - Press the TRACK KNOB (21) to change all settings back to default.
G. EXIT & SAVE - Exit & Save your custom settings until you power down. Press the TRACK KNOB (21) to
exit & save.
NOTE:
SAVE: U1/U2, PITCH ON/OFF, PITCH RANGE, SGL/CTN, AUTO CUE, TIME MODE, HOLD, KEY LOCK,
EFFECTS ON/OFF, PLAYLIST, REPEAT MODE, MIDI CHANNEL, MIDI SETUP, CROSSFADER, CROSSFADER
REVERSE, DISPLAY TIME, SCROLL SPEED, SENSITIVITY, INTENSITY, A.CUE LEVEL, DISPLAY
DEFAULTS: U1/U2 (U1), PITCH (OFF), PITCH RANGE (10%), SGL,CTN (CTN), AUTO CUE (ON), TIME MODE
(REMAIN), HOLD (OFF), KEY LOCK (OFF), EFFECTS (OFF), PLAYLIST (NORMAL), REPEAT MODE (ALL),
MIDI CHANNEL (1-2-3), MIDI SETUP (TAP=HOLD, I/O=HIDE), CROSSFADER (UNLOCK) CROSSFADER
REVERSE (OFF), DISPLAY TIME (3sec.), SCROLL SPEED (400ms), SENSITIVITY (0), INTENSITY (4), A.CUE
LEVEL (-48dB), BIT RATE DISPLAY (ON)