American Audio Versadeck - Manual (Page 23)

© American Audio ® - www.AmericanAudio.us - VERSADECK Instruction Manual Page 23
BASIC OPERATIONS (CONT.)
2) Press the IN BUTTON (22). This will set the starting
point of the SEAMLESS LOOP. The IN BUTTON (22)
LED will light.
1) Press PLAY/PAUSE BUTTON (13) to activate playback
mode.
Figure 17
Figure 16
3) Press the OUT BUTTON (22) to set the ending point for your LOOP
(Figure 18). The IN BUTTON (22) and OUT BUTTON (22) LEDs will
immediately begin to flash rapidly, indicating the SEAMLESS LOOP
mode has been activated.
VFD LOOP INDICATORS - During a loop, the RELOOP INDICATOR
(73) will turn on in the VFD DISPLAY (23) indicating a loop is active.
EXITING A LOOP - To exit a SEAMLESS LOOP, press the OUT
BUTTON (22). The IN BUTTON (22) and OUT BUTTON (22) LEDs will
remain lit. Music playback will resume normal play. The IN BUTTON
(22) and OUT BUTTON (22) LEDs will remain lit to remind you that a
loop is in memory.
Figure 19
Figure 18
9. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop to
create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length
of disc. You create a seamless loop between two continuous points of a disc.