American Audio Versadeck - Manual (Page 32)

© American Audio ® - www.AmericanAudio.us - VERSADECK Instruction Manual Page 32
Figure 42
FLANGER EFFECT: The Flanger effect distorts the output signal and
creates an effect similar to frequencies phasing in and out of each
other. The FLANGER Effect has two adjustable parameters, Parameter
Time (PT) and Parameter Ratio (PR). The PT will adjust the Time Range
and the PR will adjust the Frequency Range (see "Parameters" in the
next section).
Figure 41
Figure 43
PARAMETERS:
All the effects have adjustable parameters. The parameters change the
way the effects will react. To adjust the parameter values for any of the
effects, press the PARAMETER BUTTON (18) you wish to adjust, then
use the JOG WHEEL (16) to adjust the Parameter settings. The JOG
WHEEL (16) must be in CDJ mode to make the adjustments. When the
parameter value is adjusted the VFD display will indicate the parameter
adjustment. All effects have two adjustable parameters; X PARAMETER
TIME and Y PARAMETER RATIO. Use these parameters to customize
the effects to your liking.
HOLD BUTTON: Use the HOLD BUTTON (18) to lock your parameters.
If the hold button is not activated any changes to your parameters will
be momentary. To activate the hold function press the HOLD BUTTON
(18) as in figure 43. When the hold function becomes activated, the hold
button LED will glow.
The HOLD BUTTON (18) is also used to lock up the entire player
so that
there are no accidental mistakes . The mixer functions will not be locked so that
adjustments can be made to the audio levels. Press the HOLD BUTTON (18)
for at least 3 secs. to lock the player. LOCK will appear quickly in the
VFD, and the HOLD BUTTON (18) LED will flash. To unlock the player
press the HOLD BUTTON (18) for at least 3 secs. or until UNLOCK is
displayed in the VFD.
BUILT-IN EFFECTS