Jog wheel fucntions – American Audio Versadeck User Manual

Page 29

Advertising
background image

©

American Audio

®

- www.AmericanAudio.us - VERSADECK Instruction Manual Page 29

Figure 32

JOG WHEEL TOUCH SENSITIVITY:

The platter of the jog wheel is touch sensitive allowing certain play

and cue commands, as well the scratch effect, to be controlled by touching or tapping on the touch sensitive

jog wheel.

ADJUSTING JOG WHEEL TOUCH SENSITVITY:

The degree of sensitivity can be adjusted to make it

more or less sensitive. Press and hold the FOLDER KNOB (1) to enter the INTERNAL MENU. Turn the FOLDER

KNOB (1) clockwise till SENSITIVITY is displayed. Turn the TRACK KNOB (21) to find your desired sensitivity,

the range of sensitivity is from -20 to +20. The VFD (23) will display the degree of sensitivity. When you have

found your desired level press the FOLDER KNOB (1) to confirm and exit.

A.CUE: Before you can use the JOG WHEEL (16) to control the play and

cue commands you must first activate the A.Cue Mode. To activate press

the A.CUE BUTTON (9).

IN PLAYBACK MODE: While in play mode and with the A. Cue Mode

active, the JOG WHEEL (16) can be used to return the unit to last cue

point. Simply touch the JOG WHEEL (16) and unit will immediately return

to the last set cue point and playback without music interruption.

IN CUE MODE: While in cue or pause mode and with the A. Cue Mode

active, touching or tapping on the JOG WHEEL (16) can be used to

start playback. The unit will continue to playback until the JOG WHEEL

(16) is released. Once the JOG WHEEL (16) is released the unit will

return to the last cue point.

Figure 33

Figure 34

JOG WHEEL FUCNTIONS

Advertising