American Audio Versadeck - Manual (Page 39)

© American Audio ® - www.AmericanAudio.us - VERSADECK Instruction Manual Page 39
CUE PAN
SLIDER
VR
34 73 VR:00~7F
CUE PAN
LEVEL
VR
33 72 VR:00~7F
Fader Start
ON(L)
SW
1 40 7FH _ON
00H _OFF
Fader Start
OFF(L)
SW
2 41 7FH _ON
00H _OFF
Fader Start
ON(R)
SW
3 42 7FH _ON
00H _OFF
Fader Start
OFF(R)
SW
4 43 7FH _ON
00H _OFF
C.F CURVE
(L)
SW
7 46 7FH _ON
00H _OFF
C.F CURVE
(CENTER)
SW
6 45 7FH _ON
00H _OFF
C.F CURVE
(R)
SW
5 44 7FH _ON
00H _OFF
CC-ABSOLUTE (VR, LEVEL METER LED) TYPE
Control Change messages are sent with status 0xBn, where n is the channel, for the specified CC controller. Thus the controller MIDI ID
is indicated with the channel along with the CC number. The value from 0x00 to 0x7F, directly related to the location of the controller.
LEVEL METER LEDS
00~0B => ALL LEDS OFF
0C~17=>LED(-30) ON
18~23=>LED(-30, -20) ON
24~2F=>LED(-30, -20, -10) ON
30~3B=>LED(-30, -20, -10, -7) ON
3C~47=>LED(-30, -20, -10, -7, -4) ON
48~53=>LED(-30, -20, -10, -7, -4, -2) ON
54~5F=>LED(-30, -20, -10, -7, -4, -2, 0) ON
60~6B=>LED(-30, -20, -10, -7, -4, -2, 0, +2) ON
6C~77=>LED(-30, -20, -10, -7, -4, -2, 0, +2, +4) ON
78~7F=> ALL LEDS ON (-30, -20, -10, -7, -4, -2, 0, +2, +4, +7)
CC-RELATIVE (ENC)TYPE
Control Change messages are status 0xBn, where n is the channel, for the specified CC controller. Thus the controller MIDI ID is
indicated with the channel along with the CC number. The value from 0x40 to indicate the change in the controller. This is an offset to
0x40 “one’s complement” notation.
A message with data 0x43 indicates a positive change of 3.
A messages with data 0x31 indicates a negative change of 15.
SWITCH ON/OFF (SW,CENTER TYPE)
These messages are used for switches.
Control Change messages are sent with status 0x9n, SWITCH On and Off value are 0x7F and 0x00, where n is the channel.
LED ON/OFF (LED TYPE)
These messages are used for LED.
Control Change messages are sent with status 0x9n, LED On and Off value are 0x7F and 0x00, where n is the channel.
*
MIDI MAP