Biamp RED-1 - Manual (Page 8)

8
RED-1 sEt Up
Edit Display Brightness
To change the brightness of the OLED panel, scroll to the Display Brightness icon and press the Select button. Use the scroll wheel
and Select button to make adjustments. The first setting represents the normal operational display brightness, and the second setting
represents the dim display brightness. Display brightness cannot be assigned via Device Maintenance in the Audia or Nexia software.
Edit Timeouts
To change the lock, dim, and sleep timeouts, scroll to the Timeout icon and press the Select button. Use the scroll wheel and Select
button to make changes. For lock and dim, the timeout can be none or range from 5 seconds to 30 minutes; for sleep, the timeout cannot
be none. Timeouts may also be assigned via Device Maintenance in the Audia or Nexia software.
View Device Information
To view information about the unit, scroll to the Information icon and press the Select button. The Serial Number, MAC Address,
Firmware Version, and System ID are displayed. This is read-only information. The Serial Number is helpful in identifying physical units/
locations when naming them via Device Maintenance in the Audia or Nexia software. Press the Select button again to exit this screen.
Exit
To exit the setup screen, scroll to the Exit Door icon and press the Select button.