Burkert Type 8793 - Manual (Page 30)

30
Operationandfunction
6.4.2. Write parameters to the device
noTe!
if changes are made and transferred with the "write all parameters to device" function, it is possible that
parameters in the device will be unintentionally overwritten!
• Read the current device data before you make the changes or
• transfer only the modified parameters by using the selection options "Write directory only" or "Write directory
and subdirectories only".
procedure:
→
Connect
→
Write parameters to device
with option to select: Write all parameters to device
Write directory only
Write directory and subdirectories only
If the parameters are transferred using the PACTware "Device / Store to device" menu item or using the
PACTware
icon, all (!) parameters will be written to the device.
More extensive explanations describing operation and how to create a project are available in the PACTware
online help. For start-up and parameterization, refer also to the operating instructions for the relevant device.
6.5. parameterization
A distinction is made in parameterization between offline and online mode.
offline mode
In Offline mode the project can be created and parameters can be changed and saved without devices con-
nected. Then the data can be saved later to connected devices in Online mode
8) .
online mode
In Online mode the device to be parameterized must be connected and ready for operation. Selecting the cor-
responding DTM by right clicking and selecting the "Connect" command or with PACTware menu "Device /
Connect" causes Online mode to be prepared. Then parameters can be read directly from the device or trans-
ferred to the device
8) .
8)
Note regarding read / write device data:
The device DTM is a universally valid DTM containing all parameters for all device variants. A check therefore
determines before the data transfer from DTM which device variant is connected and deactivates the
parameters/ menu items of variants not present in the DTM.
English
Software Tool - 8x92 / 8x93