Burkert Type 8793 - Manual (Page 39)

39
Auxiliaryfunctions
8.4. auxiliary functions - parameter
Parameterization and transfer of parameters are described in Sections “6.5. Parameterization” and “6.4.
Transferring parameters”.
noTe!
if changes are made and transferred with the "write all parameters to device" function, it is possible that
parameters in the device will be unintentionally overwritten!
• Read the current device data before you make the changes or
• transfer only the modified parameters by using the selection options "Write directory only" or "Write directory
and subdirectories only".
Modified values can be transferred to the database with the Apply or OK
button. If you exit the function with the Cancel button, the changes are not transferred.
You can save the project with the "File / Save" menu item.
8.5. auxiliary functions - setting parameter
The additional functions are described in detail in the relevant operating instructions of the positioner /
process controller.
English
Software Tool - 8x92 / 8x93