Basic functions - setting parameter, Actuator, Input – Burkert Type 8793 User Manual
Page 35: Enter the standard signal
35
Basicfunctions
7.3.
Basic functions - setting parameter
7.3.1.
ACTUATOR -
inputting the operating mode of the pneumatic actuator
Only for Types 8692 / 8693.
The operating mode of the pneumatic valve actuator used in combination with the positioner / process controller
can be input in this menu option.
The operating mode of the actuator has been preset at the factory.
CFA and CFB:
single-acting
CFI:
double-acting
The control function (CF) of the actuator can be found on the type label.
ACTUATOR
Operating mode actuator
single-acting
single-acting
double-acting
Figure 25:
ACTUATOR function
7.3.2.
INPUT -
enter the standard signal
→
Under this menu option, enter the standard signal used for the set-point value.
Factory setting: 4 – 20 mA
INPUT
setpoint input
4 ... 20 mA
4 ... 20 mA
0 ... 20 mA
0 ... 10 V
0 ... 5 V
Figure 26:
INPUT function
English
Software Tool - 8x92 / 8x93