Burkert Type 8709 - Manual (Page 8)

8
Basic Safety Instructions
Basic safeTy insTrucTiOns 3.
These safety instructions do not make allowance for any
contingencies and events which may arise during the installation, operation and maintenance of the devices. •
local safety regulations – the operator is responsible for observing these regulations, also with reference to the •
installation personnel.
danger – high pressure!
Before loosening the lines and valves, turn off the pressure and vent the lines. •
risk of electric shock!
Before removing covers, • switch off the power supply and secure to prevent reactivation!
Observe applicable accident prevention and safety regulations for electrical equipment! •
danger from escaping operating fluid!
If contact is made with the operating fluid and its reaction products, including in vapor form (touching, inhaling), •
there is an acute risk of injury.
Observe applicable accident prevention and safety regulations for the operating fluids used. •
general hazardous situations.
To prevent injury, ensure that:
The system cannot be activated unintentionally. •
Installation and repair work may be carried out by authorized technicians only and with the appropriate tools. •
After an interruption in the power supply or fluid supply, ensure that the process is restarted in a defined or •
controlled manner.
The device may be operated only when in perfect condition and in consideration of the operating instructions. •
The general rules of technology apply to application planning and operation of the device. •
noTe!
electrostatic sensitive components / modules!
The device contains electronic components which react sensitively to electrostatic discharge (ESD). Contact
with electrostatically charged persons or objects is hazardous to these components. In the worst case scenario,
they will be destroyed immediately or will fail after start-up.
Observe the requirements in accordance with EN 61340-5-1 and 5-2 to minimize or avoid the possibility of •
damage caused by sudden electrostatic discharge!
Also ensure that you do not touch electronic components when the power supply voltage is present! •
The LFC / LFM Types 8718, 8719 / 8708, 8709 were developed with due consideration given to the accepted
safety rules and are state-of-the-art. Nevertheless, dangerous situations may occur.
Failure to observe this operating manual and its operating instructions as well as unauthorized tampering
with the device, release us from any liability and also invalidate the warranty covering the devices and
accessories!
english
Type 8718, 8719 / 8708, 8709