Burkert Type 8791 - Manual (Page 39)

39
Attachment and assembly
11.2.2. installation
Warning!
risk of injury from improper installation!
• Installation may be carried out by authorised technicians only and with the appropriate tools!
risk of injury from unintentional activation of the system and an uncontrolled restart!
• Secure system from unintentional activation.
• Following assembly, ensure a controlled restart.
procedure:
→
Using the bracket
②
the clamping pieces
③
, hexagon bolts
⑰
and circlips
⑯
attach the hoop to the
actuator spindle.
3 17
2
16
Figure 14: Attaching the hoop
→
Select short or long lever according to the stroke of the actuator.
(see “Table 21: Attachment kit for linear actuators” part no. 6a/6b).
→
Assemble lever (if not pre-assembled) “Figure 15”.
english
Type 8791