Burkert Type 8055 - Manual (Page 23)

SE 56
23
210_EN_BU_4_3_5X.d
oc
9.1* Date and time set
9.2 Automatic data logger enable
9.4 Displaying of the data stored in the data logger
9.5 Displaying of the last 64 alarms stored in the data logger
9.7 Logged data cancel function
9.6 Visualization function of minimum and maximum peak of flow rate
9.8 Reset all alarm events
9.9 Reset all minimum and maximum peak of flow rate stored
9.3 Interval time for the data logging function: 1, 2, 3, 6, 8, 12, 24, 48 hours
10.1* Enable the calibration of the converter
10.2* Converter autotest
10.3* Flow rate simulation enabling
11.1 Level 2 access code enter
11.2 Block level function can be set from 0 to 3
11.4 Load user data saved
11.5 Save user data
11.7 Ignore the calibration error during the switch on test
11.6 Visualisation of the total operation hours of the converter (function not editable)
11.8 Ks Coefficient
11.3 Load factory data pre-set
12.1 of batch cycles to be done to define the value of compensation. Value 0=OFF
12.2* % limit of compensation threshold
12.4* Prebatch value
12.5* Auto-batch
12.7* Static consent of batch
12.6* Automatic selection of batch formula
12.3* Compensation value
Menu 12: Menu visualized only with batch active
(see from pag. 35)