Fluid Components International CMF Series Guide - Manual (Page 5)

Doc. No. 06EN003318 Rev. B 5 FlexCOR TM Model CMF Series Coriolis Flow Meter
FLUID COMPONENTS, INTL
Cross-Talk
Nipple
Nipple
Mounting of Pressure Release Valve
CMF Series Plug Connection
Plug
Mount the plug in the receptacle and tighten
the knurled back shell on the plug to obtain a
good seal.
Note the wire colors when connecting the
CMF-B through F. Refer to the diagram for
electrical wiring.
ELECTRICAL CONNECTIONS
CMF - B Through F PLUG CONNECTION CMF - A PLUG CONNECTION
Wiring the Transmitter
Separate the enclosure from the base. Route
conduit and cables to the instrument. Connect
the instrument per the following diagrams.
Screw (2) Places Screw (2) Places
Loosen Allen
screw, unscrew
back cover
Unscrew Front
Face